WJ 7 ply corrugated cardboard production line
| No. | Machine name | QTY | Remarks |
| 1 | Mill Roll Stand | 7 sets | The RS - 1500 type, Base paper lifting, clamping loosening, left
shift, right shift are hydraulic control, two brakes, expand chuck. The maximum paper width is 1850mm, the maximum paper diameter
1500mm Hydraulic valve made in Tianyuan . |
| 2 | Rail and Tracks | 14 sets | 6m railing with pulley 16# channel steel |
| 3 | Pre-heater | 3 sets | MH-600,900,1000,1100T .￠600mm,900mm,1000mm,1100mm, electric adjust
wrapping angle Wall Thickness 18 |
| 4 | Single facer | 3 sets | Single facer(SF280S/320S/360S or HF series), corrugated roller
￠(280,320,360,380,408)mm. Corrugated Rollers 48CrMo alloy steel Corrugated Rolls tungsten carbide, Origin : RMM Applicator glue roller,doctor glue roller Origin:Jiangsu Haili Digital show glue quantity.glue part can remove Electric adjusts glue area. Gimbal drive Bearings:(mainly)NSK Japan; Delta frequency changer |
| 5 | Pre-conditioner | 3 sets | MH-600,900,1000,1100T .￠600mm,900mm,1000mm,1100mm, electric adjust
wrapping angle Wall Thickness 18 |
| 6 | Three Layer Bridge Conveyor | 1 set | BS-T Adsorption, frequency leading paper Three layers |
| 7 | Four Pre-heater | 1 set | MH-600,900,1000,1100T .￠600mm,900mm,1000mm,1100mm900mm, electric
adjust wrapping angle Wall Thickness 18 |
| 8 | Triplex Gluing Machine | 1 set | GA-288D. Gluing roll diameter 288mm Origin:Jiangsu Haili Dividing glue roller diameter:120mm Origin:Jiangsu Haili Figure show gluing details, main bearing adopt NSK brand,press
rolls type,or system for variable wrap on glue applicator
roll,modular system for easy clean of glue rolls PLC control |
| 9 | Double Facer | 1 set | DF-745. Heating plants: 600mm×20,hydraulic lift down,big worm box,converter
motor . With 12pcs press plate Wall plate casting,main drive with rubber |
| 10 | Main Driven | 1 set | DF-745 Diameter 745mm Rubber roller Independent reducer box, gimbal driving. |
| 11 | NC slitter | 1 | Change order 5-8second,zero press line, Suction scrap device |
| 12 | Trim suction system | 1 | Waste paper suction system |
| 13 | NC cutter | 1 | SNC-180N, Paper length is 9999mm. The computer can store multiple
orders, the man-machine interface is separated, the display shows
production information, and the computer controls the automatic
change list without stopping the machine. Paper cutting accuracy +
1mm. Cutter shaft of 228mm spiral knife in Taiwan |
| 14 | Paper holder | 1 | Pneumatic |
| 15 | Automatic gantry stacker | 1 | CF-180, the upper pile length: 3500 mm; stacking height: 250 mm,
lower stacking length: 3000 mm |
| 16 | Glue making system | 1 set | GF-T.Main Glue Making System. Main pot 1 set, carrier pot 1 set, and storage pot 1set Glue station pump, single facer glue pump and gluing machine glue
pump. Circle supply glue, pipeline provided by customer |
| 17 | Pneumatic system | 1 set | GF-T Pneumatic System. Include0.9m3storge tank1. Pump and pipeline provided by customer |
| 18 | Electric system | 1 set | EF-T Electric control system including wires from switch board to main motor. Domestic famous brand :Chint etc |
| 19 | Steam system | 1 set | SP-S Steam system Shanghai drain water valve ,main wires by buyer |
WJ150-1800 7 ply corrugated cardboard production line
- Design speed:150m/min
2,Working speed:130-150(3 ply) 130-140 (5 ply) 100-120m/min (7 ply)
3,Working width:1800mm
4,Production line size:
Note:The testing paper should as per below request when tested the
production line
Reel–paper grade not less than B.
The moisture rate of reel paper:11%±1%
Face paper: 120-200g/m2
Core Paper: 90-125g/m2
Liner Paper: 90-150g/m2
Corrugated paper: 90-125g/m2
5,according to the customer request can be choose as below:
6,Voltage: 380V 50Hz three-phase four-wire system(or as per clients
country standard)
7,Equipment direction:Left or right transmission will be according
to customer’s request.
8,Steam consumption: about 4000kg/h
9,Total power:About 380 kw Common power:About 280 kw
10,Equipment size:105m×12m×6m(L×W×H)
Note:Customer’s self-provided part
1,Compressor main air pipeline and glue main pipeline
2, Electrical power supply, the wires for link to operate box and
circuitry pipeline
3,Water source, water feeding pipeline and barrel
4,Groundsill plane installation project for water, electricity and
air
5,For testing machines material,such as paper, corn starch, caustic
soda and borax
6,The engine oil, lubricate oil, hydraulic oil, grease and high
temperature lubricating
grease for equipment.
7,The food, hotel for technicians of installation and test. And
provide some workers to
assist in installation.
8,Seller need to arrange at least 6 engineer to installation the
machines.but
Buyer need to cooperate with our engineer
9,Buyer need to prepare the boiler 4 tons
