Working width: Max.2200mm min 1100mm
*Maximum mechanical speed:200mm/min
*Actual running speed:160-180mm/min
*working air pressure:0.6～0.9MPa
*Steam pressure:0.8～1.3MPa
*steam consumption:0.65～1t/h
*temperature requirement:160～200℃
*Total machine power:53.45 kw
*Working power supply: voltage: 380V; frequency: 50Hz
*External dimension: 4400mm×1900mm×2100mm (length × width × height)
Characteristics of the equipment
Hydraulic type, paper guide adopts wind adsorption to maintain the
stability of corrugated type at high speed.
* by the fan through the true empty box corrugated paper adsorption
in the corrugated roll 180 degrees in the range of negative
pressure, to complete the rolling corrugated.
* the width of the lower corrugated roller suction groove is no
more than 2.5mm, which can reduce the stripe marks of single-sided
corrugated board.
* the transmission part adopts universal joint transmission,
isolating vibration source, making the transmission more stable,
reliable operation and stronger maintenance.
* the reducer is lubricated with oil, and the closed gear is driven
to reduce the vibration of the machine.
* use automatic circulation glue supply, pneumatic glue and reset,
with buffer effect.
* the gluing area is electrically adjusted, and the gluing part
operates independently when the machine stops to prevent the paste
from being exhausted.
* the surface of the cots has been specially embossed and chrome
plated.
* the rubber coating part is driven separately and can be pulled
out for convenient maintenance and cleaning.
* corrugated rolling part of separate small wall board design, tile
roll easy to remove, maintenance, replacement of the corrugated
type is convenient and fast.
* upper and lower corrugated roller is made of high quality alloy
steel, after heat treatment, hardness in HRC 56-60 degrees.
