【SS -200N Computerized Slitter Scorer (0 press line )】
Product Introduction
The mechanical speed: 200m/min, Effective width 1800mm
You can store 999 groups of orders, not stop automatically change
or manual change.
The change quickly, for a single time 3-8 seconds, two machine and
can realize deceleration immediately for a single.
The automatic tracking production line speed, and ensure
synchronization, with production management systemattachment,
strong compatibility.
By the programmable controller of high quality and high performance
of computer and slave computer control system.
The three line type: convex to concave (three lines), convex to
concave (five lines), convex to level, three wire type electric
conversion. The depth of the pressure line wheel can be
automatically controlled by the computer.
The thin tungsten steel alloy blade, blade sharp, life of more than
8 million meters.
The knife is controlled by computer automatic sharpening or manual
sharpening, edge trimming knife, improve production efficiency.
Adopts imported synchronous drive device, precision, long service
life, low noise operation.
The main parts of the bearing, other Harbin Bearing
The appliance for Schneider
The MITSUBISHI inverter
The linear guide of Taiwan
Technical Parameter:
| Model | 1800 |
| Max slitting width (mm) | 1800mm |
| Min slitting width (mm) | 140 |
| Min scoring width (mm) | 0(130) |
| Scoring height (mm) | 0-10 |
| Blade (mm) | φ260×158×1.3 |
| Blade & Scoring Composed Type | 5blade 8 line |
| Power (KW) | 24 |
| Machine dimension (mm) | 3900X2100X2340 |
