BS－T Duplex Bridge
Technical Parameter
* Working width:1600mm
* Max speed:120m/min
* Dimension:33200mm×3930mm×4300mm
* Guiding paper roller: Upper, front ￠135mm Upper, behind ￠135mm
* Slow transmitting paper roller: active roller￠135mm passive
roller￠135mm
tension roller￠85mm hang roller￠100mm
absorption transmitting paper roller:￠100mm
* Electricity: 380V 50 Hz Total Power: 18.2kw
Characteristic
* Exactly transmitting single facer corrugated cardboard to
strain-tighten set or wind absorption set through transmitting
belt, for next process use.
* Adopting wind absorption strain-tighten set, 4 KW high-voltage
centrifugal fan vacuum adsorption strain set, electro motion
correct deflection, to make sure cardboard stick tightly and level
off.
* Electric control install two groups of operation plate, upper and
lower bridge can be adjusted arbitrarily.
* On paper-receiving unit, adopt independent conversion driver,
transmit the single corrugated cardboard across the bridge and keep
enough cardboard quantity on bridge to meet the changing production
speed, pre-heated by multi pre-heater, and stick through gluing
machine and double facer.
* Equipped upward paper carrier, and two groups of transmitting
belt conveyors, the transmitting speed is slowly, so as to form
wave-like stacking, and to store corrugated cardboard.
Raw materials and purchased parts:
*Channel steel of main bridge:# 20 steel Origin: An Steel
*Paper-receiving unit transmitting belt: Nylon industry belt.
* Paper storage unit transmitting belt: Parallel transmitting belt
* Guiding paper engine( conversion control): 4.0 kw 2set continuous
work Origin Wuxi
*Absorption tension engine: 4.0 kw 2set continuous work Origin Wuxi
*Paper width adjustment engine: 0.55 kw 4 sets short time work
Origin: Hengshui
* Bearings: Wa, Ha, Luo bearing with seat :Jinrun, Zhejiang
* Electric appliances: Chinti Zhejiang
